No products in the cart.
|Size of Tile:||285 * 305mm (11.2" X 12")|
|Thickness:||Around 2 mm (0.08")|
|Principal Ingredients:||Epoxy resin + PET back|
|Nominal Finish:||Epoxy resin + PET back|
|Gross Weight:||1.5 Kgs per box (± 0.3 kgs)|
|Standard Packaging:||Carton box package, 10 tiles in one package|
|Customization:||Available for order over 200 square meter|
|Notes:||Patterns, photos and drawings are for illustration purposes only. Final production may vary.|
Easy DIY peel and stick tile concept of mosaic sticker smart tile is made of an adhesive substrate topped with a gel component called epoxy resin, the embossed 3d epoxy resin offers stunning visual impact. the tiles are thin and light, they can be installed in minutes over a clean and sleek surface without any mess or specialized tools, and never crack with time. Bathroom backsplash wall tile is also an economic wall covering material, if you are getting tiled of the same design, just peel them off and change a new style. Art3dTM mosaic sticker offers veracious collections to meet you different taste. Bathroom backsplash wall tiles are lightweight, easy to handle, cut and maintain, they will remain on your walls for as long as you wish them to be. The tiles can also be easily installed directly over existing panels or smooth surface. Especially designed for kitchen backsplashes and bathroom backsplashes, the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower).
- Bathroom backsplash wall tile
- Do it yourself, easy cut and trim, no grout, no glue, no special tools and no mess
- Lightweight and thin, easily installed directly over existing panels or smooth surface
- Extremely suit for kitchen backsplashes and bathroom backsplashes
- Guaranteed to stick to your walls
Art3dTM backsplash sticker is a peel & stick wall tile, it is a simplified and economics wall material and its relative easy to finish your wall covering in anytime almost instantly.
Art3dTM backsplash sticker has a protective layer of plastic on the top, which help to prevent dust when installation.
Back splash is very easy to install, for detailed installation guide and video guide, please visit backsplash sticker installation guide
Bathroom Backsplash Wall Tile Application
Bathroom backsplash wall tile is an ideal wall covering product that can be used in interior decoration, it can be used in wet environment such as bathroom and kitchen room, please note that it can't use in shower. Bathroom backsplash wall tile is especially designed for kitchen backsplashes and bathroom backsplashes, it can be stick on wall or remove easily. Other than that, bathroom backsplash wall tile can also use in glass door or screen decoration, or stick on cabinet door. Note: please note that bathroom backsplash wall tile can't use in shower.
Contents: Nice, my wife love it
David @Feb 23, 2017 United States
Contents: It still hanging on my wall after almost 6 months. I have to put a glue from time to time. But I feel my wall was not even in that places, we had to clean it better before putting it in. I still love the pattern and our bathroom looks very modern.
@Feb 17, 2017 United States
Contents: Great product, would recommend to friends!!
Craig A. Derby @Feb 17, 2017 United States
Contents: Very thin. other than that, it is good
@Feb 15, 2017 United States
Contents: Very easy to pop up, very nice backsplash tiles
@Feb 15, 2017 United States
Contents: Received earlier than expected
Latasha Griffin @Feb 09, 2017 United States
Contents: Used this as the backsplash of my kitchen. I really like the way it looks like real tile. I wish there were better directions on how to put it up because there isnt a lot of info. We have also had some start to come off the wall but that could be because I would stick then unstick then stick again to make sure it was perfectly aligned. Overall I really like it as a cheap way to do a backsplash.
@Feb 02, 2017 United States
Contents: This brought new life to my super boring kitchen! This was much easier than I thought and was really worried about taking on this project but I'm glad I did. Here is what I did. Preparation was sanding the painted wall smooth and remove the old nasty sealant from the top of my counter-top. Used a power sander and the ALLWAY TOOL CT31 3 in 1 for caulk removal and smoothing of new caulk once applied (after the back splash was put up). This took a while to get that nasty gummy old sealant up. Once finished sanding I cleaned up my mess and wiped down the walls with light soap and water towel ensuring all the dust particles were up. Once completely dry, I used a cheap little black and decker laser level to make sure my line was straight. This didn't help me much since my counter top wasn't exactly level but it did provide me with a guide. I still measure out a few random points and marked them with a pencil to ease my OCD. Using an large Amazon box cut open and spread across the floor with trash bags around it I got my first 12x12 back-splash tile and removed the backing. Holding it low and close to the old Amazon box I sprayed it with 3M adhesive spray (recommended from the included instructions). This might be a no brainer but I'll throw it out there cause I did it.....I cut the staggered ends off one tile (the first tile) and place that one on the wall cause the next tile you place will overlap the first one. I just put the first tile on the wall and didn't consider the placement of the next. Staggered end will overlap the previous tile. Continued to place tiles against the wall one after another doing my best to keep them level. Don't worry if you get a bit off level, a slight offset isn't very noticeable and is correctable with the next tile. I started at the top staggered edge and worked left to right using my hands to ensure it was firmly up against the wall and overlapping the previous tile. Cutting around light switches and electrical outlets was not that hard. Before I peeled the waxy back off revealing the adhesive, I would line it up on the wall to check where the light switch/outlet was and using an exact-o knife I cut a small square out. I cut small each time because I figured it would be better to keep cutting a little more than cutting to much and my patience payed off. I did my best to just cut around the metal enclosure box that houses the outlet or switch. Once it laid flat against the wall, I peeled, sprayed, put it on the wall and put the outlet cover back up. That is pretty much it. I took a lot of breaks; found this at times to be a bit nerve racking. Working under my cabinets with poor lighting trying my best to be as accurate as possible. Rounding a corner was easier than I thought as well. Just keep pressing all the way up to the corner and then press it into the corner. Lastly I added my sealant to the top of the counter top, let it dry, cleaned up my mess, wiped my back splash down with a damp towel for a last minute check for bubbles. Took me over three hours from start to finish.
BloodAgent @Jan 31, 2017 United States
Contents: Excellent quality, we are super impressed that we spent less than a hundred dollars for beautiful backsplash. VERY sticky. Love that it comes in a pack of 6.
Stormy Maratas @Jan 31, 2017 United States
How Will My Order Ship?
We will ship your order using the fastest, safest, and most reliable method possible. Therefore, we have established strong relationships with some of the best delivery companies nationwide. Every product on our site has been carefully selected to ship by a particular shipping method in order to provide you with an optimal delivery experience. When your order ships, we will notify you via email. Tracking Number can be found on the custom interface, We encourage you to track your package online or on the phone with the carrier. Most companies can provide an estimated delivery date. Be sure to contact us if anything seems unusual with the progress of the shipment. Please note we cannot ship to P.O. Boxes or Military APOs.
What is the return policy?
Returning merchandise is always inconvenient, expensive and no fun for any party involved. That is why we are trying to avoid returns by making sure our customers understand what they are ordering right from the beginning.
Please read item descriptions, supporting information and FAQ carefully. We offer unique products and try to provide our customers with most detailed description possible upfront. Please take advantage of our product sample programs.
Please visit http://www.art3dwallpanels.com/return-policy/ for detail.
What is the payment method?
We accept PayPal payment. Supports Visa, Master card, American Express, Discover and more, it is the faster, safer way to pay.
Other than Paypal payment, we also accept TT transfer, West Union Transfer, Alipay and Wechat transfer, please contact us if needed.